Plastic deck flange anchor (Elephant Feet), surface mount slides and
residential equipment with 1.90" tubing (apox 1-15/16" inch) , set of 4 with mounting hardware

Aluminum deck flange anchor (Elephant Feet), surface mount slides and
equipment with 1.90" tubing (apox 1-15/16" inch), sold individually.
Includes bolt and nut to secure tubing but no to deck anchoring hardware.

Mounting hardware anchoring deck flange.
Includes (4)bolts, (4)washers and (4)anchors for anchoring 1 flange

Plastic wedge anchor socket, 4" deep. Uses PW-P plastic wedge.
Includes wedge, washer, bolt, bonding screw and bonding lug.
Manufactured by Perma-Cast for 1.90" tubing (apox 1-15/16" inch).

Aluminum wedge anchor socket, 4" deep. Uses PW-4C bronze wedge, Includes wedge, washer, bolt and bonding screw.
Manufactured by Perma-Cast for 1.90" tubing (apox 1-15/16" inch).

Bronze wedge anchor socket, 4" deep. Uses PW-4C bronze wedge.
Includes wedge, washer, bolt and bonding screw.
Manufactured by Perma-Cast for 1.90" tubing (apox 1-15/16" inch).

S.R.Smith Aluminum Gibraltar double anchor set,
with wedges and stainless escutcheons for ring style handrails. that are 1.625 OD tubing (1-5/8" inch) Special Order

S.R.Smith Bronze Gibraltar double anchor set, with wedges and stainless escutcheons for ring style handrails that are  1.625 OD tubing (1-5/8" inch)

Inter-fab Bronze Gibraltar double anchor set, with wedges and stainless escutcheons for ring style handrails that are 1.625 OD tubing (1-5/8" inch)

Replacement Anchor wedge and bolt assembly
for # 6255166 and # 6255170 anchor

Replacement brass wedge for the Frost style socket.
7/16" thick, 1-5/16" long, 1-1/4" wide.
Comes with 1-1/2" S.S Bolt and Washer

Replacement Double wedge and bolt kit,  will replace most double anchor wedges, converts bolt thru escutcheon wedge types.
use escutcheon #6255198 listed below under 'Escutcheons
View Instructions

6255171
Replacement Brass Wedge for the Frost style socket.

The 6" deep cast Bronze Anchor Assembly provides a suitable mounting point for S.R.Smith and Inter-fab games. The anchor comes complete with cover plate to provide a flush look when games are removed. The anchor does not use any wedges. The anchor is tapped for and is provided with a 1/4-20 UNC brass ground screw for bonding. Accommodates 1.90" O.D Tubing.  (apox 1-15/16" inch).

Inter-fab 6" deep Bronze anchor socket assembly, with cover plate

WaterWay Pole Holder for concrete installation is great for holding umbrella stands or game poles.
Pole holder is made out of plastic. WaterWay's description is ' Volleyball Pole Holder '

 

White, Pole Holder

Black, Pole Holder

Stainless steel hinged bracket can be mounted in existing deck anchors or can be permanently mounted into the deck with rebar. Allows grab rails and ladders to be swung out of the way.
 

Snap-Lok hinge, swings ladders out of pool

Replacement Snap-Lok hinge button - Special Order

Stainless round escutcheon plate for 1.90" OD rail

Stainless oblong escutcheon plate for 1.90" OD rail

Escutcheon for double anchors, Chromed Plastic,
replaces most double escutcheons, for escutcheons with thru bolt anchor, use wedge replacement kit #6255174

Rubber rail bumpers for 1.90" OD tube, protects the pool wall

Expandable rubber bumpers for 1.90" OD tube, expands and locks for
the strongest grip, protects the pool wall