Bottom Mount, 1/4" MIP, 0-60 psi, 2" viewing diameter

Bottom Mount, 1/4" MIP, 0-100 psi, 2" viewing diameter

Bottom Mount, 1/4" MIP, 0-60 psi, 2" viewing diameter
Pentair Gauge with Clean / Dirty Indicator

Rear Mount, 1/4" MIP, 0-60 psi, 2" viewing diameter
Pentair Gauge with Clean / Dirty Indicator

Rear Mount, 1/4" MIP, 0-60 psi, 2" viewing diameter

Jandy CL Series Cartridge Filter Pressure Gauge / Air Bleed Assembly, 0-60 psi, Clean / Dirty Indicator

Pressure Gauge
with Clean / Dirty Indicator.
Bottom Mount
Pentair O.E.M
Gauge #190058
H2O# 7481218

Pressure Gauge
with Clean / Dirty Indicator.
Rear Mount
Pentair O.E.M
Gauge #190059
H2O# 7481220

Pressure Gauge
Air Bleed and Clean / Dirty Indicator Assembly for
Jandy CL Series Cartridge Filter.
Assembly has specialty threads
andis not interchangeable
with other gauges.
H2O# 9895012 

Bottom Mount, 1/4" MIP, 30 HG-0

This gas line pressure test gauge is completely assembled with brass hex manifold, air valve with a plastic cap and a 2” dial face. Gauge has a steel case with a plastic lens and indicates in 1lb increments. Brass manifold connection is 3/4" FPT with 1/4” FPT gauge tap and 3/4” FPT connection.
 

0-30 PSI, 3/4" female

0-100 PSI, 3/4" female

1/8" MIP brass petcock style air relief / drain cock

1/4" MIP brass petcock style air relief / drain cock

Special Threads, High Flow Air Relief Kit, WITH gauge, 1/4" plug on
top accommodates included gauge with Clean / Dirty Indicator.

Special Threads, High Flow Air Relief, NO Gauge, 1/4" plug on
top can accommodate 1/4" bottom mount gauge if applicable.

1/4" FIP plastic air relief valve kit complete, includes hardware for thru
lid installation on Triton II Sand Filters, Pentair *

Manual air relief body assembly, includes o-ring and gauge,
for TR100C and TR140C Pentair Sand Filters

1/4" FIP plastic air relief valve, used on System 3 filters, Sta-Rite *