No.
|
Manf #
|
H2O # |
Description
|
1 |
357199 |
9760459 |
Clamp, Cam & Ramp,
almond |
2 |
357151 |
9760466 |
Cover, clear, WFE
pump |
2 |
357156 |
-------- |
Cover, chemical
resistant Cam & Ramp |
3
|
350013
|
9760067 |
O-ring, WFE cover,
Cam & Ramp |
4
|
070387
|
9760571 |
Basket - O.E.M
from Pentair |
4
|
-
|
9093200 |
Basket - Generic
|
5 |
070430 |
-------- |
Bolt, 3/8-16 x
1-1/4" hex hd. SS - 4 required |
6 |
072184 |
-------- |
Washer, 3/8" x
13/16" o.d. SS - 2 required |
7 |
070431 |
-------- |
Bolt, 3/8-16 x
1-3/4" hex hd. SS - 2 required |
8 |
071403 |
-------- |
Nut,
3/8-16 hex hd - 2 required |
9 |
357100 |
9760441 |
Gasket for seal plate -
Note 'B'
- color Black
Can be used on all Volutes after 11-98 |
9 |
357102 |
9760445 |
Gasket for seal
plate -
READ Note 'B'
- color Almond
Use only if preferred over black gasket on early models after
11-98 until 02/1/08 |
10 |
350015 |
9760074 |
Volute ONLY,
almond - ( Also see # 26 for kit option ) - |
11 |
355227 |
9760641 |
Diffuser O-ring - ( for Aladdin generic
o-ring use H2O# 9094387 ) |
12 |
071660 |
9760655 |
Diffuser Set Screw
- 2 required |
13 |
072928 |
9760704 |
Diffuser Assembly
for WFE-12, 3 HP ONLY |
13 |
072927 |
9760697 |
Diffuser Assembly
for WFE-2 thru WFE-8, 1/2 HP thru 2-1/2 HP |
14 |
071652 |
9760480 |
Impeller Screw |
15 |
075713 |
9760557 |
Impeller Screw
Washer |
16 |
071734S |
9091135
U.S.Seal |
Shaft Seal,
AS-1000 style seal - Direct O.E.M replacement is H2O# 9760690 |
17 |
070429 |
-------- |
Bolt, 3/8-16 x
7/8" SS hex hd. - 4 required |
18 |
074564 |
9760529 |
Seal Plate +98 |
19 |
070927 |
9760599 |
Foot |
20 |
070929 |
9760606 |
Foot Insert |
21 |
071657 |
-------- |
Screw, 1/4-20 x 1"
hh. SS - 2 required |
22 |
071406 |
-------- |
Nut, 1/4-20 hex.
hd. SS - 2 required |
23 |
072183 |
9761419 |
Washer, Flat -
1/4" x 5/8" - 2 required |
24 |
071131 |
9760613 |
Drain Plug - LESS
O-ring - 2 required - ( also called knob
plug drain ) |
25 |
192115 |
9760053 |
Drain Plug O-ring
- ( verses flat gasket below ) -
2 required |
25 |
074629 |
9760543 |
Drain Plug Gasket
- ( verses O-ring above ) -
2 required |
26 |
357149 |
9760452 |
Volute Kit, Cam/Ramp
Includes items 1 thru 4, 9, 10, 16, 18, ( qty 2 ) of 24 & ( qty 2 ) of 25
-
Note
'A'
|
27 |
071312S |
1035103 |
Motor - WFE-2
- Black Color - Pentair Pump Number 011511 - Single Speed |
27 |
071313S |
1035106 |
Motor - WFE-3
- Almond Color - Pentair Pump Number 011512 - Single Speed
|
27 |
071314S |
1035109 |
Motor - WFE-4
- Almond Color - Pentair Pump Number 011513 - Single Speed
|
27 |
071315S |
1035112 |
Motor - WFE-6
- Almond Color - Pentair Pump Number 011514 - Single Speed
|
27 |
071316S |
1035115 |
Motor - WFE-8
- Almond Color - Pentair Pump Number 011515 - Single Speed
|
27 |
071317S |
1035118 |
Motor - WFE-12
- Almond Color - Pentair Pump Number 011516 - Single Speed
|
28 |
073126 |
9760711 |
Impeller -
WF-2, WF-23, WFE-2, WFK-2 |
28 |
073127 |
9760718 |
Impeller -
WFE-3, WFE-24, WF-3, WF-24, WFK-3, WFDS-3,WFDS-24 |
28 |
073128 |
9760725 |
Impeller -
WFE-4, WFE-26, WF-4, WF-26, WFK-4, WFDS-4, WFDS-26 |
28 |
073129 |
9760732 |
Impeller -
WF-6, WF-28, WFE-6, WFE-28, WFK-6, WFDS-6, WFDS-28 |
28 |
073130 |
9760739 |
Impeller -
WF-8, WF-30, WFE-8, WFE-30, WFK-8, WFDS-8, WFDS-30 |
28 |
073131 |
9760746 |
Impeller -
WFE-12, WF-12 |
Note 'A'
- Pumps
manufactured before 11-98 require a volute replacement kit.
Note 'B'
- Look on the back
of the volute seal plate,
above the Rotation 'Arrow'.
You will either see a number 211
or
number
311.
These numbers indicate that these are the newer seal plates, so you should
use the Black gasket ( square edges on both sides ) and not the Almond gasket
( beveled on one side and square on the other ). If you do not see any
number
or you see a number 111, then you are looking at an older seal
plate. We recommend using the
Black gasket on all seal plates and no longer use the Almond
gaskets. The Almond gaskets can fail prematurely and leak.
Reminder: The Black gaskets have square edges on both sides where the
Almond gasket is beveled on one side and square on the other.
Also Available
- Go kit which contains gaskets and pump seal - H2O# 9090320 (
Go-Kit 32 ) - Includes old and new seal plate gasket. Note that both
gaskets are black in the Go Kit. |