Note 1: Item 3A
O-ring - Standpipe is used on model TA100D Filters only. Item 3B O-ring -
Standpipe is used on Tagelus Filter models TA30, 40, 50, 60 manufactured
before April, 1993. Item 38B is not used on Tagelus Clamp Filter models
TA30D, 35D, 40D, 50D, 60D or any Tagelus models manufactured after April,
1993.
Note 2: Tagelus
Clamp Filter models Tank & ft. assy. have valve adptr. (Item 6) factory
installed.
Note 3:
Replacement of Tank ft. requires the use of mounting tape. See part number
listed.
Note 4:
Lubricate O-ring liberally w/ silicone lubricant and tighten to following
spec: TA30D, 35D, 40D, 50D, 60D. Handtight plus 1/4 turn min. TA100D
Handtight plus 3/4 turn min.
Note 5: Tagelus
Filter models TA30, 35, 40, 50, 60 manufactured after Nov, 1, 1991, were
manufactured w/ a btr. thread top opening and utilize a btr. style valve
which is black in color. A change was made to the port arrangement in
April, 1993, which will require that minor changes be made to the valve
plumbing connections when replacing valves on filters manufactured between
Nov. 1991 and Mar. 1993. DO NOT ATTEMPT TO
INTERCHANGE THREAD TYPES.
Note 6: Tagelus
Filter models TA30, 40, 50, 60 manufactured before Nov, 1, 1991, were
manufactured w/ a "V" thread style valve that is white or brown in color.
These valves may be replaced only w/ "V" thread style valve P/N 261124,
see Detail B. DO
NOT ATTEMPT TO INTERCHANGE THREAD TYPES.
Note 7: Tagelus
Clamp Filter models TA30D, 35D, 40D, 50D, 60D manufactured after Nov, 1,
1991, were manufactured w/ a btr. thread top opening and utilize a btr.
thread valve adptr. P/N 154555, see Detail A
below.
DO NOT ATTEMPT TO INTERCHANGE THREAD TYPES.
Note 8: Tagelus
Clamp Filter models TA30D, 40D, 50D, 60D manufactured before Nov, 1, 1991,
were manufactured w/ "V" thread top opening and utilize a "V" thread valve
adptr. P/N 155225, see Detail B below.
DO NOT ATTEMPT TO INTERCHANGE THREAD TYPES.
Note 9: TA60D
Filters manufactured after June 1, 2007 have new 1/4 turn laterals.
|
No.
|
Manf #
|
H2O # |
Description
|
1A |
262506 |
1630214 |
Valve 1-1/2 in.
6-way clamp style TA30, TA35D, TA40D,
TA50D, TA60D |
1A |
261185 |
1630218 |
Valve 2 in.
6-way clamp style TA100D |
1B |
261130
|
-------- |
Valve
1-1/2 in. 6-way btr. thread TA
(note 5)
This valve has been replaced with Pentair # 262504 listed next |
1B |
262504 |
1630210 |
Valve 1-1/2 in.
6-way btr. thread or clamp style. (note 5)
Adapts from clamp to butress.
This valve can either be used as a
Clamp style or Buttress Style valve but not 'V' Thread |
1B |
261124 |
1630206 |
Valve 1-1/2 in.
6-way "V" thread-TA (note 6) |
2A |
272541 |
9763156 |
O-ring valve
bdy. 3/16 in. x 4-3/4 in. i.d. TA30D, TA35D,
TA40D, TA50D, TA60D |
2A |
275333 |
9761200 |
O-ring valve
bdy. 3/16 in. x 6-1/2 in. i.d. TA100D |
2B |
154493 |
9761089 |
O-ring valve
bdy. .157 in. x 5.75 in. i.d. TA30, TA35,
TA40, TA50, TA60 |
3A |
355330 |
9760382 |
O-ring stndp.
1/8 in. x 2-3/8 in. i.d. TA100D
(note 1) |
3B |
155064 |
-------- |
O-ring stndp.
1/8 in. x 1-7/8 in. i.d. TA30, TA35, TA40,
TA50, TA60 (note 1) |
4 |
152165 |
-------- |
Clamp 6-1/2 in.
dia. TA30D, TA35D, TA40D, TA50D, TA60D
s/s, plastic |
4 |
152130
|
-------- |
Clamp 8.35 in.
dia. TA100D |
5
|
190059
|
7481220 |
Gauge back
mount pressure - O.E.M -
( old Pentair No. before 190059 was
155050 ) |
5
|
190059
|
7481135 |
Gauge back
mount pressure - Non-O.E.M |
6 |
154555
|
-------- |
Adapter 6 in.
btr. thd. TA30D, TA35D, TA40D, TA50D, TA60D
(notes 4 & 7) |
6
|
155225
|
-------- |
Adapter 6 in.
"V" thd. TA30D, TA40D, TA50D, TA60D
(notes 4 & 8) |
6 |
154521
|
-------- |
Adapter 8-1/2
in. btr. thd. TA100D
(note 4) |
7 |
154494 |
9094173 |
O-ring valve
adptr., .157 in. x 5.75 in. i.d. TA30D,
TA35D, TA40D, TA50D, TA60D |
7 |
355619 |
-------- |
O-ring valve
adptr., 1/8 in. x 8-1/4 in. i.d. TA100D |
8
|
155002
|
-------- |
Stabilizer,
center pipe |
9 |
155276 |
-------- |
Tank & ft.
assy. w/ valve adptr. TA40D
(notes 2, 7 & 8) |
9 |
155279 |
-------- |
Tank & ft.
assy. w/ valve adptr. TA50D
(notes 2, 7 & 8) |
9 |
155269 |
-------- |
Tank & ft.
assy. w/ valve adptr. TA60D
(notes 2, 7 & 8) |
9 |
155324 |
-------- |
Tank & ft.
assy. w/ valve adptr. TA100 & TA100D
(notes 2, 7 & 8) |
9 |
155342 |
-------- |
Tank & ft.
assy. btr. thread style TA40
(notes 5 & 6) |
9 |
155343 |
-------- |
Tank & ft.
assy. btr. thread style
TA50 (notes 5
& 6) |
9 |
155358 |
-------- |
Tank & ft.
assy. btr. thread style TA60
(notes 5 & 6) |
10 |
155060 |
-------- |
Piping assy.
( dim. D = 12-7/8 in.) -
TA30 & TA30D |
10 |
153455 |
-------- |
Piping assy. (
dim. D = 14-7/8 in.) -
TA35 & TA35D |
10 |
155061 |
-------- |
Piping assy.
( dim. D = 17-3/4 in.) -
TA40 & TA40D |
10 |
155062 |
-------- |
Piping assy. (
dim. D = 19-7/8 in.) -
TA50 & TA50D |
10 |
155063 |
-------- |
Piping assy. (
dim. D = 22-5/8 in.) -
TA60 & TA60D
|
10 |
155340 |
-------- |
Piping assy. -
less hub^ ( dim. D = 27-1/4 in.) -
TA100 & TA100D
|
10 |
155323 |
-------- |
Piping assy. -
w/ hub^ ( dim. D = 27-1/4 in.) -
TA100 & TA100D
|
10 |
155299 |
-------- |
Piping assy. -
w/ hub^ ( dim. D = 27-1/4 in.) - TA60D
- ( see note 9 ) |
11 |
155007 |
-------- |
Lateral -
5-11/32 in. long TA30, TA30D, TA35, TA35D,
8 req. |
11 |
152290 |
9761210 |
Lateral -
6-11/32 in. long TA40, TA40D, TA50, TA50D,
TA60, TA60D, 8 req. |
11 |
152202 |
9761221 |
Lateral - 9-1/8
in. long TA100 & TA100D |
11 |
150085 |
-------- |
Lateral, 1/4
turn, 6 req. -
TA60D - ( see note 9 )
|
12 |
154926 |
-------- |
Foot tank
TA35, TA35D, TA40, TA40D, TA50, TA50D,
TA60, TA60D |
12 |
154596 |
-------- |
Foot tank
TA100D (see note 3) |
13 |
154698 |
9761155 |
Spigot 3/4 in.
NPT sand drain TA30D, TA35D, TA40D, TA50D,
TA60D |
13 |
154685 |
-------- |
Spigot 1/2 in.
NPT sand drain TA30, TA35, TA40, TA50, TA60 |
13 |
152220 |
9761042 |
Spigot 2 in.
NPT sand drain TA100 |
14 |
192115 |
9760053 |
O-ring drain
plug 1/16 in. x 1/2 in. i.d. |
14 |
154871 |
-------- |
O-ring drain
plug TA100 |
15 |
154699 |
9760032 |
Plug 1/4 in.
NPT drain |
16 |
154512 |
9761095 |
Wrench 6-1/2
in. across flats TA30D, TA40D, TA50D, TA60D |
16 |
151608 |
-------- |
Wrench 9 in.
across flats TA100D |
- |
154402 |
-------- |
Tape ft.
mounting (not shown)
all except TA100 & TA100D |
- |
154407 |
-------- |
Tape ft.
mounting (not shown) TA100 & TA100D only |
18 |
272599 |
-------- |
Label top mount
valve |
- |
155051 |
-------- |
Sand guide |
|
|
|
|
Not all items
shown are available for sale individually, but may be purchased as
part of a kit. |
|
Detail A and B |
Note: To
determine manufacture date, the first 4 digits of the serial
number indicate the month and year product
was manufactured. |
|
|
Detail A, (after 12/1/91)
6 in. btr. Thread.
|
Detail B, (before 12/1/91)
6 in. "V" Thread.
|
last update -
March, 2005
|
|
|