The IntelliChlor chlorine
generator uses common table salt to produce chlorine, right in the pool
– safely, effectively, and automatically. Same sanitation performance as
manual chlorine addition without the drawbacks. No need to buy,
transport and store expensive chlorine compounds. No more odor, stinging
eyes, irritated skin and bleached out swimsuits.
Featured Highlights
Cell blades are rated for
more than 10,000 hours of operation – five years of reliable chlorine
output under
normal operating conditions
Full diagnostic
capabilities, including cell life tracking that communicates remaining
hours of cell life in real-time. Captures all performance
data daily (production settings, hours of operation, chlorine output,
cell
cleaning cycles, salt readings, and water temperature averages) making
it easy to maintain perfect water
Push-button operation and
easy-to-view displays enable fast checking of salt levels, cell
cleanliness,
sanitizer output, and water flow
Automatic shut-off feature
protects the unit and prolongs cell life under low water temperature
conditions Union inlet and outlet
connections make cell replacement fast and easy On-time cycling prevents
calcium and scale build-up to maximize cell life Ability to communicate with
IntelliTouch Automation Systems Certified to UL 1081
standard for safety
IntelliChlor Cell
H2O #
Manf. #
Description
3818321
520554
IntelliChlor
IC20 Cell, up to 20,000 gallons,
produces up to .70 pounds of chlorine every 24 hours
Features two terminal blades and five bi-polar blades
3818331
520555
IntelliChlor
IC40 Cell, up to 40,000 gallons,
produces up to 1.40 pounds of chlorine every 24 hours
Features three terminal blades and ten bi-polar blades
A Power Center is required when
installing a IntelliChlor Cell
Power Center
H2O #
Manf. #
Description
3818341
520556
IntelliChlor
Power Center
About the IntelliChlor Power Center
The Power Center converts AC electrical current to a low voltage DC current
which is required by the cell to perform the electrolysis. The power supply
is connected with the pool circulation pump electrical source so that the
electrolytic cell only operates when the pool pump is on. The enclosure can
be mounted vertically on the wall up to 15 feet away from the cell
controller. The Power Center contains the transformer, fuse, connector to
the cell and the 110 VAC and 220 VAC wiring configuration with the 36 VDC
output cable to the cell controller. A fuse holder is mounted on the bottom
of this enclosure for additional protection. There are no other controls or
lights on the unit.
IntelliChlor Replacement Parts -
Pentair
Replacement Parts
H2O #
Manf. #
Description
3818351
520595
Replacement Union Half, sold as set of 2, includes O-rings