The Corona Discharge Eclipse™ series produces up to five times
the concentration of ozone produced by a UV generator. The unit is
connected to the main circulation system so each time the main pump
turns on, ozone is automatically introduced into the water. Reducing
chlorine use by 80-90%, the Eclipse™ not only saves time and money but
it gives one the peace of mind that you're doing your part to reduce
your environmental impact.
Eclipse Units Only - ( does not include
parts bag )
H2O #
Manf. #
Description
3860180
EC-1-16
Eclipse 1 corona discharge generator for
pools 7,000 to 25,000 gallons,
115 volts with standard household plug,
0.25 grams per hour
3860183
EC-2-16
Eclipse 2 corona discharge generator for
pools 15,000 to 50,000 gallons,
115 volts with standard household plug,
0.5 grams per hour
3860186
EC-4-16
Eclipse 4 corona discharge generator for
pools 25,000 to 100,000 gallons,
Can be wired either 110 / 120 volt or 220 / 240 volt,
1.0 grams per hour ***
***
Special Order
Installation Parts Bag - ( required for new installs )
H2O #
Manf. #
Description
3860190
9-0210-11
Parts bag for the Eclipse 1, 2 & 4 ( designed for a single speed pump
) Includes: Injector Manifold
Ozone tubing
Ozone Check Valve Screws for mounting Eclipse
to wall Bubble Ball
style ozone flow meter Water Check Valve ( used
for installations which are above pool waterline )
Total Eclipse Corona Discharge Pool
Ozone Generator
- DEL Ozone
The ultimate sanitation solution for
in-ground pools. The TOTAL ECLIPSE
generator is designed to recirculate pool water with its own pump and
inject ozone 24 hours a day. The TOTAL ECLIPSE installs independent
of pool equipment and will operate regardless of whether your pool
system
is on or off. Plumbs off the main circulation pipe after the filter and
before
the heater.
H2O #
Manf. #
Description
3860195
ECT-2-16
Total Eclipse corona discharge generator for
pools
to 60,000 gallons, includes built in injector and circulation pump,
115 volts, 0.4 grams per hour
Mixing DEGAS Vessel - for
use with Total Eclipse
- DEL Ozone
Includes: Main Mixing Vessel ( shown above )
Gas Destruct Vessel ( smaller vessel )
1/4" Tubing and Hose Clamps
Qty 1 - 3/4" Valve
Qty 3 - 3/4" Slip x Mip 90
Qty 3 - 3/4" Slip x Mip
Qty 2 - 2" Couplings
Qty 2 - 2" Slip x 2" Slip x 3/4" Fip Tees
Mounting Hardware
Del 1/3 lb. Spring Check Valve
Use this Mixing DEGAS Vessel (MDV ) to eliminate ozone
off-gassing in a swimming pools and spas. By eliminating ozone off-gas,
the MDV prevents bubbles from disrupting the surface of the pool or from
gathering under the pool cover. It also eliminates the potential of
ozone reacting with the pool and spa components such as covers, fittings
or pillows. With this method of injecting ozone into the system you can
oversize the ozone so that you can achieve maximum chemical reduction.
H2O #
Manf. #
Description
3860197
MDV-20
Mixing DEGAS Vessel for Total Eclipse
( Total Eclipse ozone unit is sold separately )
Ozone Generator
Accessories
Spa Ozone Test Kit
3860159
H2O #
Manf. #
Description
3842400
37073
Mazi 1078 injector, 1" mip x 3/8 barb
3860144
7-0610
Del Mini Injector, 3/4" mip x 1/4" barb
3860159
3547
Lamotte Ozone Test Kit
4831301
304304PV-0011S000-3508
1/4" barbed ozone check valve
with
red break apart body
for ozone supply
4831309
7-1140-01
1/4" barbed ozone check valve, one
piece,
spring loaded,
for ozone supply
9304245
59200
Tubing Flo Control Clamp, used to reduce ozone flow through tubing.
Injector Manifold
