Deck-O-Seal two part, elastomeric polysulfide-based joint sealant is a premium grade, pourable, self-leveling non-staining sealant, which cures at ambient temperature to a firm, flexible, tear-resistant rubber. Deck-O-Seal is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation. Deck-O-Seal has outstanding resistance to weather-aging and won’t discolor. It provides excellent adhesion to most surfaces without using messy primers. Deck-O-Seal is used for caulking and sealing all joints subject to structural movement to provide a firm, flexible, weather tight seal. It is excellent for general purpose caulking of joints and seams, weather proofing, and both interior and exterior expansion joint sealing. Use of Deck-O-Seal is recommended in areas where complete cure is necessary before pedestrian and vehicular traffic is allowed.

White, 24 oz. kit

6/case

White, 96 oz. kit

4/case

Grey, 24 oz. kit

6/case

Grey, 96 oz. kit

4/case

Redwood, 96oz. kit

4/case

Tan, 24oz. kit

6/case

Tan, 96oz. kit

4/case

DECK-O-SEAL ONE-STEP is a single-component, non-sag, elastomeric polysulfide-based sealing compound used for caulking joints in structures that are subject to movement caused by temperature changes. ONE-STEP resists the effects of oil and gasoline when spills are wiped up immediately. Premixed, ready-to-use sealant provided in self-contained, 11 oz. Cartridges to reduce mess, mixing and waste.
 

Gray, 110z. One Step sealing compound

Tan, 110z. One Step sealing compound

DECK-O-FOAM Expansion Joint Filler is a tough, flexible, lightweight filler with a long life expectancy. It is designed to replace brittle asphalt impregnated fillers. DECK-O-FOAM provides a convenient “removable” portion that ensures a uniform sealable void in the joint. Prior to sealing or caulking, the “removable” strip can be easily extracted leaving a trim clean joint.
 

Deck-O-Foam expansion joint filler 1/2" x 3" x 50 ft roll,
foam for backing Deck-O-Seal in deep joints