The MP Industries Auto-Lev is an accurate, easy to install device that will maintain
exact water levels on pools, spas, hot tubs, fountains, ponds or
water-holding tanks. It's simple and easy-to-adjust float valve assembly
is accurate and maintenance-free. Auto-Lev is constructed of durable
high-impact plastic and sports a commercial grade, all-brass float
assembly. The plumbing port is a standard 1/2" female slip. The
equalizer lines are 1" or 1-1/2" female slip. The top access lid is also
available in tan and gray and an extension collar (4058) that raises the
ring and lid 1" is also available, both by special order.
MP Industries Water Level Control
H2O #
Manf. #
Description
6225102
1953-J
MP Products water level control
Replacement Parts
H2O #
Manf. #
Description
6225109
4059
MP Products water level
replacement float & valve assembly
6225110
4061-W
MP Products water level lid,
white
6225303
( 24vac replacement valve )
Levolor is a completely electronic water level sensing system that can
be used in all aquatic environments, new or existing. The system
includes an adjustable sensing probe and monitoring computer with a
splash timer to compensate for swells and surface disturbances. When the
water level drops below the probe for approximately two minutes the
computer opens a solenoid valve until the water reaches a level above
the probe. Levolor is time clock activated and runs only when the
equipment is running. Includes sensor wire with dual sensor and 1"
solenoid valve.
Units are factory wired for 220 volts but can be converted to 110 volts
in the field.
Single Body of Water Level Control
H2O #
Manf. #
Description
6225210
K1100CKC
Levolor water level control 110 or 220
volt with 100’ sensor
and one 1" solenoid valve
6225214
K1100CKE
Levolor water level control 110 or 220
volt with 150’ sensor
and one 1" solenoid valve
Dual Water Level Control ( same as
above but, controls 2 bodies of water )
H2O #
Manf. #
Description
6225235
K2300CKE
Levolor dual water level control
110 or 220
volt,
Two - 150’
sensors and Two - 1" solenoid valves
for pool / spa combo
Water Level Control for Vanishing Edge Pools
H2O #
Manf. #
Description
6225230
K2000CKC
Levolor dump and fill water level control, 110 or 220
volt,
One - 100’ sensor and One - 1" solenoid valve
This unit requires an
additional 24VDC DPST relay for interfacing with the pump.
Relay is not included with water level control. We recommend using the
following relay.
H2O# 3041012 - Omron 24VDC DPST Relay
Levolor Replacement Sensor and Valve
H2O #
Manf. #
Description
6225293
S2046C
Levolor dual style replacement sensor 100’,
( for all units listed except Vanishing Edge )
6225295
S2046E
Levolor dual style replacement sensor 150’,
( for all units listed except Vanishing Edge )
6225298
S2046G
Levolor dual style replacement sensor 200’),
( for all units listed except Vanishing Edge )
