|
< Prev
E-2
Next
> |
|
Ramco Spa Controls |
|
|
|
|
|
Low voltage electronic pool or
spa controller. Choose between a one channel or two channel control box.
Each channel will control a one spa component. Combine control boxes to match the
total number
of channels required to control equipment. May be interfaced
with time
clock for two speed pumps. Top side buttons and temperature
controls
interface with control panel to give equipment switching
from the spa.
|
|
Control Boxes |
|
H2O # |
Manf. # |
Description |
|
3050103 |
3-50-0001 |
ST-401, one channel control box
only |
|
3050107 |
3-50-0002 |
ST-402, two channel control box
only |
Temperature Control and Top Side Buttons |
|
H2O # |
Manf. # |
Description |
|
3050111 |
3-00-0001 |
ST-4001, Remote 1 button
switch with indicator light |
|
3050115 |
3-00-0002 |
ST-4002, Remote 2 button
switch with indicator lights |
|
3050119 |
3-00-0003 |
ST-4003, Remote 3 button
switch with indicator lights |
|
3050143 |
3-00-0010 |
2 Button In house for
ST-1200/4 |
|
3050123 |
3-00-0004 |
ST-131 Remote temperature
control ** |
|
3050127 |
3-00-0005 |
ST-132, Remote temperature
control with 1 button and 2 indicator lights |
|
3050135 |
3-00-0009 |
ST-1200/4, Remote 4 button
with temperature control,
on-off button and indicator lights |
|
** Temperature control
can switch a Millivolt gas heater without unitizing a channel on the
controller. |
Optional Freeze Sensor and Drywell |
|
H2O # |
Manf. # |
Description |
|
7420150 |
4-30-0002 |
Grease filled thermo well for
use with topside, 1/2" Threads x 6" long *** |
|
3050151 |
3-85-0032 |
Freeze sensor, 3/4" threaded,
normally open switch **** |
***
Thermostats are mechanical and
require a drywell for the probe which must be located close to topside.
**** Connect freeze
sensor in parallel with low voltage top side panel for protecting a
piece of equipment, such as a pump. |
 
|
|
3050111
3050115 ( remote )
3050119 |
3050123
3050127
3050143 ( in house )
|
 |
|
Top Side Replacement Parts
- Ramco |
|
Old Style Replacement Top Side ST-1100
9813187
|
|
|
|
H2O # |
Manf. # |
Description |
|
9813187 |
3-00-0012 |
ST-1100 Top Side |
|
9813208 |
3-05-0001 |
Thermostat, SPDT, 25 AMP, 36" X 5/16" bulb
probe, mechanical
Fits all Ramco Topsides, Spaded connections |
|
9813229 |
3-05-0001 |
Button Kit - Includes on/off switch with round and square button parts |
|
Thermostat replacement tip.
Label can remain
on. Remove knob. Under knob are 2 indents where screw holes line up with
thermostat.
Take a razor blade and cut two small ‘X’s over the screw
holes. Unscrew old thermostat and screw on new thermostat.
Add a very
small dab of silicone (if desired) under cut in label. Replace knob.
|
|
|
< Prev
E-2
Next
> |
|
|
Sorry, we are not a retailer.
We sell wholesale to businesses associated with the Pool / Spa and Water
Industries only.
©
2008 H2O Company Inc.
|
|
