<  Prev    C-17    Next  >
 Stainless Heat Sinks - S.R.Smith

 

While Supplies Last

Stainless Heat Sinks

Heat Sink Measurements


 

 


 


Heat sinks are of polished, 304 stainless steel with outer diameters varying between 1-5/8 in. and 2-1/4 in. (depending upon model chosen). The wall thickness of the connectors is .049 in. (1.25 mm). Radii of the bends as well as other dimensions of the connectors will vary with the model chosen (refer to table). 1-1/2 in. or 2 in. quick connect union fittings are included.
 
Heat Sinks
H2O # Manf. # Description
5012103 HS15-5

1-1/2" x 5" Straight stub out, set of two
5012108 HS15-8

90 degree, 1-1/2" x 8", set of two
5012113 HS15-17

90 degree, 1-1/2" x 17", set of two
5012118 HS15-23

90 degree, 1-1/2" x 23", set of two
Discontinued HS15-60

180 degree, 1-1/2" x 60", set of two
Discontinued HS20-23

90 degree, 2" x 23", set of two
Discontinued HS20-60

180 degree, 2" x 60", set of two



Specifications:
Manf. # Nominal Dia. Dim. A Dim. B Dim. C Dim. D
HS15-5 1.5 in. 1.63 in. n/a 5 in. n/a
HS15-8 1.5 in. 1.63 in. 2.25 in. 6 in. 8 in.
HS15-17 1.5 in. 1.63 in. 2.25 in. 6 in. 17 in.
HS15-23 1.5 in. 1.63 in. 2.25 in. 6 in. 23 in.
HS15-60 1.5 in. 1.63 in. 2.25 in. 60 in. loop
HS20-23 2 in. 2.25 in. 4 in. 10.75 in. 23 in.
HS20-60 2 in. 2.25 in. 4 in. 60 in. loop
 

 

 

 

 


 



 

<  Prev    C-17    Next  >

HomePage | About Us | Contact Us
Sorry, we are not a retailer. We sell wholesale to businesses associated with the Pool / Spa and Water Industries only.

 © 2011 H2O Company Inc.