|
< Prev
A-23
Next
> |
|
Hydro-Air "H" Series Bathtub Pump |
|
|
|
The Hydro-Air "H" Series whirlpool bath pump is self draining and
Includes 1-1/2" unions and air switch mounted in motor end. Not
included are the air button and tubing.
|
|
"H" Series Bathtub Pump |
|
H2O # |
Manf. # |
Description |
|
0810119 |
0010H88C |
1 hp bath pump, 120 volt, with
air switch mounted in motor end |
|
|
Hydro-Air "Magna" Bathtub Pump |
|
0810111 and 0810114
Stand Sold Separately
0810123
|
|
The Hydro-Air "Magna" Series whirlpool bath pump is self draining
and Includes 1-1/2" unions and air switch mounted in motor end. Not
included are the air button and tubing.
|
|
"Magna" Series Bathtub Pump |
|
H2O # |
Manf. # |
Description |
|
0810111 |
0003L88C |
1-1/4 EQPP bath pump, 120
Volt, 60 Hz
5.9 Amps, 12" Long x 7" Tall x 5-1/2" Wide |
|
0810114 |
0004L88C |
1-1/2 EQPP bath pump 120 Volt,
60 Hz
7.8 Amps, 13" Long x 7" Tall x 5-1/2" Wide |
|
*Note* Pumps are not rated by Horsepower |
|
Pump
Stand ( optional )
|
|
H2O # |
Manf. # |
Description |
|
0810123 |
15-2341 |
Metal Pump Stand, mounting hardware NOT included
|
|
|
Sta-Rite Bathtub Pump |
|
|
|
The Sta-Rite Dura Jet "JT" Series whirlpool bath pump is self draining
and Includes 1-1/2" unions.
|
|
Dura Jet "JT"
Series Bathtub
Pump |
|
H2O # |
Manf. # |
Description |
|
0810504 |
JTADL-2A |
3/4 hp bath pump, 115 volt,
9.2 Amps |
|
0810510 |
JTAEL-2A |
1 hp bath pump 115 volt, 11.2
Amps |
|
|
Pump
Installation Accessories |
|
4831072 |
Accessories |
|
H2O # |
Manf. # |
Description |
|
1092501 |
319-0019 |
Rubber motor mounting base pad,
reduces motor vibration and noise |
|
4831072 |
SSV |
Safety Suction Valve for Jetted Bathtubs |
| About Jetted Bathtub Safety
Suction Valve: |
|
The safety suction valve is designed to reduce the possibility of
hair entrapment. This valve is installed in the suction line by a
1-1/2" x 1-1/2" x 1" tee stubbed above the overflow. The valve is
adjustable to any psi desired to meet all safety standards. If the
pressure on the cover should reach 2 psi the pump with immediately
shut down and release the object covering the suction valve. Once
the object has been removed and the pump has had an opportunity to
re-prime itself, it will begin operating again. |
|
|
< Prev
A-23
Next
> |
|
|
Sorry, we are not a retailer.
We sell wholesale to businesses associated with the Pool / Spa and Water
Industries only.
©
2008 H2O Company Inc.
|
